Due to some extended time away from home It’s been quite some time since I’ve had anything to post here,…
Monday May 07, 2007.
Finally got around to catching the frame stress analysis model up to where the design model is this evening. The…
Thursday May 03, 2007.
Some real progress made this week, the first chassis subassembly has been cut and fitted. There’s a bit more fitting…
Build Table Part 3. April 26, 2007.
Thankfully the build table is now completed. Using a trolley jack and piles of wood each side of the table…
Tuesday April 17th 2007.
Today I retrieved the bent tubes from All Bend Engineering pictured below are the main roll hoop, lower & upper…
Build Table Part Two. April 17th 2007.
Since the last post I’ve finished trimming back the other side of the table and cleaned up the sharp edges.…
Build Table Part One April 9th, 2007.
Last week I got around to buying the steel from the salvage yard I’d found previously. Due to its size…
Sunday March 18th, 2007.
Follow this link to navigable 3D model of the frame of the 1TG, or at least what I consider to…
Friday March 16th, 2007.
I actually made some progress this week. Firstly I bought the steel required for the roll frame from GoGear here…
Tuesday March 13th, 2007.
A week or so ago I went along to a meeting of the The Sportscar Builders Club of W.A. which…