Build Table Part 3. April 26, 2007.
Thankfully the build table is now completed. Using a trolley jack and piles of wood each side of the table…
Month: April 2007
Tuesday April 17th 2007.
Today I retrieved the bent tubes from All Bend Engineering pictured below are the main roll hoop, lower & upper…
Build Table Part Two. April 17th 2007.
Since the last post I’ve finished trimming back the other side of the table and cleaned up the sharp edges.…
Build Table Part One April 9th, 2007.
Last week I got around to buying the steel from the salvage yard I’d found previously. Due to its size…