June 23, 2020. Engine re-assembly Part 1.
further major work on the engine had been stalled waiting on parts to turn up from Summit Racing which (a…
June 21, 2020
Continuing with the 3D printing, this time in PLA I produced the prototype for the exit ducting for the radiators.…
June 20, 2020
Carrying on from the last post, this is the radiator to floor brace welded up and bolted in place. And…
April 17, 2020. Progress.
Progress on the engine has stopped whilst I wait for parts to arrive. So the focus switched to other parts…
March 24, 2020. Engine Service.
With the engine now on a stand I could take it apart for inspection and cleaning. The engine has not…
March 19, 2020 Photogrammetry.
With the engine out of the car for transport I took the opportunity to try photogrammetry on it. Engines being…
March 19, 2020. Catch up Part 3, The Move.
During December 2019 my assignment in Darwin came to an end, and we were to relocate to Perth, WA. Due…
March 19, 2020. Catch up Part 2
Work was started on the fuel lines, the intention is to use hard line wherever possible and only use hose…
March 03, 2020. Catch up Part 01
Its been a long time since the last update, so here goes, this ma take more than one post. From…
May 09, 2019.
From the last post I’d folded the passenger side cover for the side box. however in the process of finishing…